GrooveLock guide
How every feature of the free GrooveLock metronome works: tempo, time signatures, subdivisions and swing, accents, polyrhythms, count-in, speed and gap trainers, songs, setlists and more. The same guide is in the app, under the menu → How it works.
- Tempo
- Tap tempo
- Time signature
- Polyrhythm
- Beats and accents
- Subdivisions and swing
- Count-in
- Speed trainer
- Gap trainer
- Practice timer
- Songs and setlists
- Song parts
- Sounds and volume
- Big count
- Headphone delay
- Screen flash and effects
- Light and dark theme
- Install the web version
- Keyboard shortcuts
- Random note generator
- Ideas and problems
Tempo
Drag the orange knob along the ring (or tap a point on the ring) to jump to a tempo quickly: slow on the left, fast on the right.
For fine steps turn the dark inner circle like a knob, 1 BPM per step. On a computer the mouse wheel works too.
A swipe that starts on the dial always turns it. If the screen scrolls (a phone browser with its bars), start the swipe outside the dial, for example on the beats or beside the dial.
Tap the big number to type an exact tempo, also with a decimal (for example 97.5).
− and + on both sides of the ring change the tempo by 1. Hold them to change it quickly; the longer you hold, the faster it goes.
The Italian word under the number (Andante, Allegro…) is the classical name for that speed.
Tap tempo
Tap TAP in time with a song or with the tempo in your head. After two taps GrooveLock sets the tempo; every further tap makes it more precise (it averages the last few taps).
Pause for more than two seconds and the next tap starts over.
Time signature
Tap the fraction (4/4) under the ring to choose the time signature: common ones like 3/4, 6/8 and 7/8 with one tap, or any combination up to 32 beats with − and +.
The top number is how many beats a bar has. GrooveLock clicks once per beat; the bottom number is the note value of one beat and is there for reading: 4/4, 4/8 and 4/16 all play four clicks per bar.
The tempo (BPM) always counts the note in the bottom number. In 6/8 at 120 BPM you hear 120 eighth notes a minute, six per bar. To feel 6/8 in two, accent beat 4 too (tap its bar), or choose 2/4 with triplets.
Polyrhythm
A polyrhythm plays two pulses at once: the beats of the bar, and a second click spread evenly over the same bar. "3 against 4" in 4/4 means three even clicks while you hear four beats.
Tap the time signature and pick a number under Polyrhythm (Off, 2 to 9). The ratio, for example 3:4, then shows next to the time signature, and a row of dots under the beats lights up with the second pulse.
The second pulse has its own, higher sound. Change it in the sound settings under "Separate sounds" → Polyrhythm.
Start slowly: count the beats out loud and listen to where the other clicks fall between them. 3:2, 3:4 and 5:4 are good first ones.
Beats and accents
Every bar at the top is one beat of the bar. Tap a bar to change how that beat is played:
Tall orange: accent (a different, brighter sound). Medium: normal. Low: ghost (quiet). Outline only: muted.
Example: accent beats 1 and 3 in 4/4, or mute beats 2 and 4 to hear only half of the clicks.
Subdivisions and swing
The note buttons add clicks between the beats: eighths, sixteenths, triplets, shuffle, and 5, 6 or 7 notes per beat. On a phone swipe the row sideways to see them all.
The row under them ("1 e & a") lets you change every subdivision: tap a syllable to make it quiet, then muted. For example mute "e" and "a" to hear only "1 &".
Swing (eighths and sixteenths) moves every second note later. 50% is straight, about 67% is the classic triplet shuffle (the slider snaps there), 75% is a hard, dotted feel. On a phone tap the "Swing" button at the end of the "1 e & a" row to open the slider; it is outlined in orange when the rhythm is swung.
The tempo dial keeps its size and place: picking a subdivision or a polyrhythm does not move it or the controls under it (their rows always keep their room). On a short screen the controls above Start scroll.
Count-in
The Count-in button next to Speed and Gap (on a computer under Practice) switches between off, 1 bar and 2 bars with each tap: before your rhythm starts you hear one click per beat, so you are ready on beat 1.
During the count-in the beats light up white and the dial shows "Count-in". The practice timer starts only after it.
The count-in has its own sound, Clave by default (a short, high wooden click), so you hear exactly where the music starts; beat 1 of the count is higher and a little louder. Change it in the sound settings under Count-in: another sound, or "Same as beats" for the accent and beat sounds of your rhythm. Songs save this choice too.
Speed trainer
Builds speed step by step: it starts at your tempo and changes it by a fixed amount every few bars until it reaches the target, then holds it.
Example: from 100 to 140 BPM, +5 every 4 bars. Each change happens exactly on beat 1 of a new bar.
Set a target below your tempo to slow down instead (useful for cooling down or for checking control).
Bars or Seconds: step every few bars, or every few seconds of playing (for example +2 BPM every 30 s). By time, the change still waits for the next beat 1, so a bar is never split between two tempos. The time counts from the end of the count-in.
At the target: Hold stays there. Start over jumps back to your starting tempo and climbs again, over and over: push to the edge, recover, push again. Back & forth steps back down to your tempo the same way it went up, then up again: a smooth warm-up and cool-down in one.
While it runs, the dial shows the tempo you are hearing. Turning the dial moves the starting tempo.
Tip: start at a tempo you can play cleanly. If it breaks down at some point, that tempo is your next goal.
The speed trainer is off while the song has parts (each part has its own tempo).
Gap trainer
Trains your inner clock: the metronome plays for a few bars, then goes silent for a few bars. Keep playing through the silence; when the click comes back you hear right away if you rushed or dragged.
Start with 2 bars on, 2 off, then make the silence longer.
Random mute also skips random clicks inside the bars that play. Beat 1 always sounds, so you never lose the bar.
During silent bars the dial says "Silent · keep going" and the beat bars only show faintly where you are.
Practice timer
Choose how long you want to practise: 1, 2, 3, 5 or 10 minutes with one tap, or any other time with − and + (one minute at a time up to 10, then in steps of 5, up to 3 hours). The timer counts down only while the metronome plays and stops it when the time is up.
Stopping the metronome pauses the timer; Reset in the timer window starts it over.
Songs and setlists
Save a setup as a song: tempo, time signature, rhythm, swing, accents, sounds, count-in and song parts. Open the library (the music icon at the top), go to Songs and tap "Save current".
Tap a song to load it. The song bar on the main screen shows its name; a dot (•) means you changed something, and the save icon writes the change into the song. × goes back to free play.
A setlist puts songs in order for a gig or a practice session. Create one under Setlists, add songs with +, drag the handles to reorder, then tap "Play setlist".
While a setlist plays, ‹ and › on the song bar switch to the previous or next song, even while the metronome runs. A Bluetooth page-turner pedal works too: it sends Page Down / Page Up.
Backup and sharing: in the library, ⋮ → "Export library" saves all songs and setlists to one file. Keep it in Google Drive, iCloud Drive or Files, or send it to someone. The share icon on a setlist exports just that setlist with its songs, for example for your band.
In a browser your songs are saved only in that browser: clearing its data deletes them, and Safari deletes them after 7 days without a visit. GrooveLock asks the browser to keep them, and while it does not, the library shows a "Keep a backup" card with "Export backup" and "Install app" (installed apps keep their data). It comes back after every 5 new songs; × hides it until then.
"Import from file" reads such a file, also on another phone or in the browser. "Add" only adds: it never changes or deletes anything you have. Songs and setlists you already have exactly like that are skipped (importing the same file twice creates no copies); if you changed or renamed a song since the export, the one from the file is added next to yours. "Replace all" makes your library exactly like the file.
Song parts
For songs that change: build a song from parts (intro, verse, chorus…), each with its own tempo, time signature, rhythm and accents, and a length in bars. For example 16 bars of 4/4 at 120, then 8 bars of 7/8.
Open the library (the music icon at the top) and tap "Song parts" at the top of Songs, or ⋮ on a saved song → "Edit parts". Then tap "Start with the current setup". Once a song has parts, the pencil next to the parts row opens them too. "Add" inserts a new part after the selected one with the same setup. The pencil sets a part's name and length; drag the handle to reorder; ⋮ duplicates or deletes a part.
The selected part (orange) is the one the main screen shows: tap a part in the row above the beats, then change its tempo, time signature, rhythm and accents with the usual controls.
Alternating bars: for songs where the time signature changes almost every bar (for example 5/8, then 7/8, over and over), use the row under the parts: it shows the bars of the selected part and "× N", how many times they repeat. + adds a bar (a copy of the selected one), so 5/8 becomes 5/8 + 5/8 and you change the second one to 7/8; tap a bar to edit it on the main screen; − removes the selected bar. ⋮ on a part → "Alternate bars" does the same from the parts list. The pencil sets the part's length; with a cycle, − and + there add or remove a whole cycle.
Start plays from the selected part (after the count-in, which uses that part's tempo and time signature). Every part plays once, the tempo and time signature change exactly on beat 1, and the metronome stops by itself at the end of the last part; then part 1 is selected again. If you stop in the middle, the part where you stopped stays selected, so Start continues from there. To play from the top, tap the first part.
The repeat button next to the parts (two arrows in a circle) repeats the whole song: after the last part it goes straight on with part 1, without stopping, until you press Stop. Turning it off while it plays lets the song end normally. Repeat is turned off when you load another song.
To practise one hard spot over and over, make a song with just that part and turn on repeat.
While it plays, the row and the beats follow the part you hear and the dial shows the part and the bar in it (for example "Chorus · 3/8"). Changing the tempo then changes the part that is playing.
The length next to the row is the playing time of the whole song, without the count-in. The speed trainer is off for songs with parts; the gap trainer works.
Save the song in the library to keep its parts. In a setlist, switching to a song with parts while playing starts it from the beginning.
Sounds and volume
The speaker icon opens the sound settings: volume and six built-in sounds (wood, click, beep, clave, rimshot, hi-hat). When the metronome is stopped, tapping a sound plays it once; while it runs, you hear the new sound right away in the clicks. The sounds for everything do not change the count-in sound.
Under "Separate sounds" you can pick a different sound for accents, normal beats and subdivisions, for example clave on beat 1 and hi-hat on the subdivisions.
Count-in, under the sounds: the sound of the count-in bars (Clave by default, another sound, or "Same as beats"). The play button next to it plays beat 1 of the count.
GrooveLock plays together with music from other apps, so you can practise along with a song.
Big count
The "1" icon at the top (or the F key) fills the screen with the number of the beat you hear, big enough to read from behind a drum kit, from across the room, or out of the corner of your eye. Beat 1 is orange.
The whole screen flashes briefly on every beat: orange on beat 1, a light touch on the others. With "Reduce effects" on there is no flash, only the number changes.
Above the number you see the bar (or the song part and the bar in it, "Count-in" before the music, "Silent · keep going" in a gap-trainer pause); below it, a dot for every subdivision ("1 e & a").
Silent mutes the click but keeps it running: the count goes on in time, so you can follow it while a band or a recording plays, or practise without disturbing anyone. Closing the big count (×, Esc, or back) always turns the sound on again.
Start / stop and the tempo are at the bottom; everything else (tempo, song, trainers) keeps working as set on the main screen.
Headphone delay
Bluetooth headphones and speakers play the sound 100–300 ms after the phone sends it. The click itself stays perfectly even, but the beats on screen light up too early.
Open the menu → "Headphone delay", put on your headphones, tap Start and tap the pad in time with the clicks you hear. After a few taps GrooveLock sets the delay; keep tapping to refine it. Then watch the orange dot and move the slider until it blinks exactly with the click.
The setting only moves the visuals (beats, dial, screen flash). Set it back to 0 when you play through the phone speaker or wired headphones.
Screen flash and effects
Turn on Screen flash in the menu to flash the whole screen orange on beat 1 of every bar. Useful on stage, with in-ear monitors, or when you cannot hear the click. For a beat number you can read from far away, use the big count (the "1" icon at the top).
Reduce effects in the menu turns off the glow around the beats and the pulse of the tempo ring; the beats still light up, so you always see where you are. It is on by itself when your phone or computer is set to reduce motion.
The screen stays on while the metronome plays, so the phone does not lock in the middle of practice.
Light and dark theme
Open the menu and pick a Theme: Dark (the default), Light, or Auto, which follows your phone or computer and switches when it does.
Dark is easier on the eyes on stage and in a dark room; Light is easier to read in daylight. The light theme uses a deeper orange so orange text stays readable on the white background.
Install the web version
In a browser (groovelockapp.com) you can install GrooveLock like an app: it gets its own icon, opens without the browser bars and works without internet once it has been opened.
Chrome, Edge and Android: menu → "Install app". iPhone and iPad: in Safari tap Share (the square with an arrow), then "Add to Home Screen".
Updates arrive by themselves: when you are online, the app loads the newest version.
Installing also keeps your songs safer: Safari does not delete an installed app's data after 7 days without a visit, as it does for a website. An exported backup file is still the safest.
On iPhone, keeping the screen on in the installed web app needs iOS 18.4 or newer; in Safari it works from iOS 16.4.
Keyboard shortcuts
On a computer or a tablet with a keyboard: Space starts and stops, ↑ / ↓ change the tempo by 1, ← / → by 5, T is tap tempo, F opens the big count (Esc closes it), and Page Down / Page Up switch songs in a setlist.
On a wide screen (a computer browser or a tablet held sideways) the shortcuts are also listed in the panel on the right, under Keyboard.
Random note generator
Menu → "Random note generator" opens a free practice page in a new tab: it shows a random note to find on your guitar (6 or 7 strings), bass (4 or 5) or ukulele, and "Answer" marks every place of that note on the fretboard up to the 12th fret.
You can choose the note names (A A♯ B, A B H or Do Re Mi), natural notes or all 12, and a string to search on. Auto gives a new note every 3, 5 or 10 seconds, so both hands stay on the instrument. Full screen shows only the note: tap anywhere for the next one.
The metronome keeps running in its own tab or window while you use it.
Ideas and problems
Menu → "Send feedback" opens your mail app with a new message to the developer (radulovicteodor@gmail.com). Ideas, missing features and questions are all welcome.
Reporting a problem: write what you did and what happened instead. The end of the message already says which version of GrooveLock and which browser or phone you use; you see it before you send, and you can delete it.
If no mail app opens, the menu shows the address so you can copy it.
Free, no ads, no account. Works in the browser on phones, tablets and computers.